Bs Mobile Jupiter 2 Firmware/Stock Rom To Unbrick Your Tablet

Admin March 02, 2017
Hi,
I convey a novel firmware in addition to this is for BS Mobile Jupiter II. This is a rom dump only. And I haven't tested it yet. Try this at your ain risk. Try the firmware if your tablet is dead but however recognizable past times the computer/laptop.





Some pictures below are exactly an event of my previous post. Replace scatter file amongst the right firmware that yous downloaded.


You tin cook the next effect inward your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead telephone but it is detected inward computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up
7. Damage Apps (Force Closing)
"DOWNLOAD THESE FILES"


Firmware Here -->BS Mobile Jupiter II Part 1
Firmware Here -->BS Mobile Jupiter II Part 2
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion 
"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If yous come across mistake inward flashtool, role dissimilar version of it."
"Please study dead links"
"I propose to role 32bit Windows OS for compatibility of the driver"

 "You tin also role 64bit version, exactly disable driver signing or driver signature earlier installing the driver."

 "This is also working inward Windows 10, exactly role the AutoDriverInstaller for the driver in addition to disable driver signing"

Installing Driver amongst AutoInstaller

 First travail the Alternative Driver, which is the AutoInstaller. Just opened upward the install.exe in addition to then it volition automatically install the driver. To fully banking concern fit if the driver is correctly installed inward your computer. 

 Follow these steps:
  1. Turn off your telephone (always powered off is a must)
  2. Press in addition to concord book upward or down, or yous tin uncomplicated press the 2 button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must notice your telephone in addition to it volition install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to four if it does non notice your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed yous are expert to become inward flashing your telephone ^_^

 Reference Video using Driver Auto Installer (watch inward HD)
Installing Manually using VCOM Driver

When installing it manually your telephone must survive turned off, in addition to then connect it to your computer/laptop piece pressing VOLUME UP or VOLUME DOWN. This volition notice in addition to hold off for the driver.


 1. This is the get-go fourth dimension that yous volition connect your telephone in addition to it volition search for the right driver.

2. Check include this location ... ... in addition to click on browse. Look for USB VCOM Driver in addition to Click on 2K_XP_COM folder if yous are using Windows XP or Win7 for Windows vii in addition to and then press OK when yous are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM volition seem inward the New Hardware Wizard.
Video Installing VCOM Driver (please sentry inward HD)





"Your Phone must survive turned off when yous are ready to connect in addition to flash your phone"


Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, in addition to charge your scatter file. (see event below)
Example only, May differ depending on phone.
Reference Video Using FlashTool version 5.xxx (watch inward HD)



  3. After yous charge the file, UNCHECK PRELOADER in addition to DSP entirely (Never flash preloader in addition to DSP if available inward firmware) If yous can't choke along flashing without these 2 files in addition to then choke along at your ain risk, press Press Download to Flash your Phone.
4. After yous press Download Follow these steps
  • Turn off your telephone (always powered off is a must)
  • Press in addition to HOLD book UP or Down or yous tin exactly press it simultaneously
  • Insert your USB cable without releasing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.
5. If successfully detected exactly hold off until the progress bar reaches 100%. If your telephone did non automatically plow on later flashing, take away battery in addition to USB cable. And seat dorsum your battery in addition to then plow on your device.
*** For non-removable battery exactly press the ability push until the telephone ability up. Some phone's convey a reset button. You tin press it to reset your phone.

"Hard reset your telephone later flashing"

Some workarounds:
If yous come across PMT_Changed mistake hither is what yous do:
In Latest version of Flashtool
  1. PMT_CHANGED mistake hap when firmware is non compatible amongst your phone. Sometimes your telephone has a dissimilar board version. You should banking concern fit it too, if your firmware is compatible amongst your phone. 
  2. Try Firmware upgrade
  3. Try dissimilar version of flashtool
  4. Try to laid Format All + Download
  5. Or travail Manual Format get-go in addition to then Download.
If yous come across Privacy Protection Password:

  1. Open flash_tool.exe
  2. Load the scatter file
  3. Goto Format Tab
  4. Click on Format except bootloader
  5. Press Play/Start Icon
  6. Then take away battery
  7. Insert the battery again
  8. Insert the USB cable (you should listen a beep on your computer, in addition to it should choke along inward formatting.)
  9. After done formatting choke along inward Flashing.
  10. Goto Download tab (I assume that yous loaded the scatter file already)
  11. Uncheck PRELOADER (this is real important)
  12. Press Download
  13. Then take away battery
  14. Insert Battery again
  15. Insert the USB cable (you should listen a beep on your computer, in addition to it should choke along inward flashing or downloading the firmware inward your phone.)
  16. Power ON the telephone later flashing.
  17. Restore your IMEI.
For Invalid IMEI (Does non operate inward MT6571 SoC):

  1. Root your telephone via vRoot/iRoot/Kingoroot or your preferred method inward rooting yous device. Your telephone must survive rooted first.
  2. Download MTKDroidsTool version 2.4.8 in addition to version 2.5.3
  3. Enable your USB debugging inward Developer Option (you also ask this inward rooting your telephone via PC)
  4. Okay inward your PC -- Open MTKDroidstool version 2.4.8 (Mtkdroidstool.exe) first. Make certain that yous connected your telephone already.
  5. Still inward Mtkdroidstool -- Click ROOT
  6. In your phone -- Influenza A virus subtype H5N1 popular upward dialogue volition appear, just grant or allow it.
  7. In your PC -- If root musical rhythm out is granted/allowed, Click inward IMEI/NVRAM tab. If it is grayed out this is the fourth dimension when yous opened upward the MTKDroidsTool version 2.5.3.
  8. Enter your master copy IMEI
  9. Click Replace
  10. Reboot your phone


FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your telephone must survive rooted first)

1. Make certain yous convey MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you tin search it inward google)
2.  In MTKDroidstool (I assume yous launch the tool) -- Click inward Root. 
3. In your device -- After yous press Root, yous ask to authorize it. Influenza A virus subtype H5N1 popular upward message volition appear. Click Allow/Authorize depends on your root application.
4. In MTKDroidsTool -- Click inward IMEI/NVRAM, in addition to then click inward RESTORE.
5. Then hold off for the folder where yous extracted the NVRAM files.
6. Check if the Baseband is fixed. And if the IMEI is fully restored.
7. If Baseband is however Unknown in addition to IMEI is invalid. Then yous ask to difficult reset get-go your phone.
8. After difficult reset your baseband should survive fixed already. (base on my experience)
9. If your baseband is fixed sometimes the IMEI is however invalid. So yous ask to restore the IMEI.
10.  To restore IMEI follow Step 1-4, but yous should non restore. You should fill upward the IMEI in addition to then click REPLACE. Then reboot your phone.  VOILA! I promise the telephone is fully working :)

I promise this tutorial help you. Please drib a comment if something is non clear to you.

Tags:

Post a Comment

0 Comments