Cherry Mobile Thunder 2.0 Stock Rom/Firmware To Unbrick Your Phone

Hey,

For those who are looking for the Cherry Mobile Thunder 2.0 firmware or stock rom for your telephone hither it is.

"Download these files"

Firmware Here -->Cherry Mobile Thunder
Part  2 -- > Firmware Part 2
Part three --> Firmware Part 3

VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller

SPFlashTool --> LatestVersion 

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If y'all come across fault inward flashtool, role dissimilar version of it."

"I advise to role 32bit Windows OS for compatibility of the driver"

Installing Driver alongside AutoInstaller

First attempt the Alternative Driver, which is the AutoInstaller. Just opened upwards the install.exe thus it volition automatically install the driver. To fully banking concern agree if the driver is correctly installed inward your computer. 

Follow these steps:

1. Turn off your telephone (always powered off is a must)
2. Press too concur book upwards or down, or y'all tin elementary press the ii button
3. Insert your USB cable without releasing the VOLUME button(s).
4. In your computer, it must uncovering your telephone too it volition install the MTK Preloader or Mediatek USB VCOM driver.
5. Repeat 1 to four if it does non uncovering your phone.
6. If MTK Preloader/Mediatek USB VCOM Driver is installed y'all are skilful to become inward flashing your telephone ^_^

Reference Video using Driver Auto Installer (watch inward HD)

Installing Manually using VCOM Driver

When installing it manually your telephone must travel turned off, thus connect it to your computer/laptop piece pressing VOLUME UP or VOLUME DOWN. This volition uncovering too expect for the driver.

 1. This is the kickoff fourth dimension that y'all volition connect your telephone too it volition search for the right driver.

2. Check include this place ... ... too click on browse. Look for USB VCOM Driver too Click on 2K_XP_COM folder if y'all are using Windows XP or Win7 for Windows vii too thus press OK when y'all are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM volition appear inward the New Hardware Wizard.

Video Installing VCOM Driver (please sentry inward HD)

"Your Phone must travel turned off when y'all are ready to connect too flash your phone"

Flashing

1. Launch FlashTool (flash_tool.exe)

2. In Flashtool, Click on Scatter-Loading, too charge your scatter file. (see illustration below)

Reference Video Using FlashTool version 5.xxx (watch inward HD)

 3. After y'all charge the file, press Press Download to Flash your Phone.

4. After y'all press Download Follow these steps

• Turn off your telephone (always powered off is a must)
• Press too HOLD book UP or Down or y'all tin exactly press it simultaneously
• Insert your USB cable without releasing the VOLUME button(s).
• Keep on repeating until Flashtool detected your phone.

5. If successfully detected exactly hold off until the progress bar reaches 100%. If your telephone did non automatically plow on afterward flashing, take away battery too USB cable. And position dorsum your battery thus plow on your device.

"Hard reset your telephone afterward flashing"

Some workarounds:

If y'all come across PMT_Changed error hither is what y'all do:

In Latest version of Flashtool

1. Load the scatter file
2. Choose Format all + Download (Underneath Scatter-loading file)
3. Then Click Download too hold off until it is done flashing

For Invalid IMEI:Your Phone/Tablet must travel rooted first
Restore yong IMEI inward MTKDroidTools version 2.5.3. You volition accept this fault when y'all format your telephone inward Flashtool equally I had experienced. To restore download MTKDroidTools version 2.5.3 After y'all extract the file. Open the dark-green robot, y'all must enable the usb debugging inward your phone. It is commonly located inward Settings>Devoloper Mode thus expect for usb debugging. After enabling it. Connect your telephone inward your figurer thus inward MTKDroidTool click on ROOT. Wait for it to finish, thus Click inward IMEI/NVRAM, input xv break inward each box. Then click REPLACE. Then click Reboot or y'all tin manually plow off your phone. Then plow your telephone on again. You tin reckon that y'all accept fully restored your IMEI.

I promise this tutorial aid you. Please drib a comment if something is non clear to you.