Sm-J510f Mt6572 Firmware / Flash File / Scatter File

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In roughly cases require concur BootKey

Wait for phone...
Phone found! [ xx ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot amongst PL ]
BootLdrSS : NORMAL amongst PRELOADER
Processing DA stage
DA Select done, volition role MTK_AllInOne_DA_v5.1624.16.07
Sending as well as initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344731640486130013299243
Initialize Memory ...
DRAM already initialized yesteryear Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A48344731640486130013299243
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC iv GiB]
DEV RID    : 0xBB23AFA98B2C9C90D2BF611231DF54AC
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content at in 1 lawsuit ...

Brand     : Samsung
ProdName  : SM-J510F
ProdModel : SM-J510F
Device    : j7201
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : J7201_5.0_V1.2 20170307-1651

[Read Ok] : preloader_j7201.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / j7201 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 673 MiB
Scatter saved to : C:\Users\Habib\Desktop\ABC\MT6572__Samsung__SM-J510F__j7201__4.2.2__J7201_5.0_V1.2_20170307-1651\

All done!

Done!
Elapsed: 00:03:07

Reconnect Power/Cable!

MT6572__Samsung__SM-J510F__j7201__4.2.2__J7201_5.0_V1.2_20170307-1651

MT6572__Samsung__SM-J510F__j7201__4.2.2_J7201_5.0_V1.7_20170510-1749

This firmware is supported each other. Tested myself, hide shot is also provided, camera, gallery, display, both sim every affair is working fine !!

Hope volition last on these outcry upwards every bit good (Not tested yet)

MT6572__Samsung__SM-J510F__j7201__4.2.2_J7201_5.0_V1.1 20170301-1449
MT6572__Samsung__SM-J510F__j7201__4.2.2__J7201_5.0__V1.10_20170822-1429
IF SOMEONE TEST information technology KINDLY COMMENTS BELOW SO THAT OTHER MAY GET BENEFIT

How to flash stock firmware rom (flash file)

Step 1: Download as well as extract the firmware on your computer.

Step 2: After extracting you lot lead keep to download SP Tool if you lot already lead keep skip this step.

Step 3: Install the USB Driver (Skip if drivers are already installed).

Step 4: Open SP Flash tool as well as charge the Scatter file from the firmware Folder.

Step 5: Click on Upgrade / Download Button inwards the Sp flash tool to receive the flashing process.

Step 6: Connect your smartphone to the calculator using the usb Driver.

Step 7: Green Ring volition seem at the halt of successful Flash.

Important notes:

Although this firmware is tested even then lead keep a backup of your mobile information earlier flashing or installing the firmware on your smartphone. As this volition help you lot to recover the information whenever whatsoever affair incorrect happens to your mobile.