G-Vill Q10 Firmware/Stock Rom To Unbrick Your Phone

Admin February 23, 2017
Hi,
This firmware is G-Vill Q10 firmware. This is a generic android device. The firmware is already tested :) But brand certain to dorsum upwards the firmware :)







All pictures below are exactly an example. 



You tin cook the next consequence inwards your phone:
1. Bootloop
2. Damaged System UI
3. TP Upgrade only
4. Dead telephone but it is detected inwards computer
5. Remove Gmail Account / Password / Pattern Lock (Alternative Way)
6. Privacy Protection Password Lock up
7. Monkey Virus/Malware 

"DOWNLOAD THESE FILES"
Firmware Here -->Firmware Download Link
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller
SPFlashTool - Latest Version

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If y'all come across mistake inwards flashtool, purpose dissimilar version of it."
"Uncheck download managing director inwards Datafilehost"

"I propose to purpose 32bit Windows OS for compatibility of the driver"

 "You tin also purpose 64bit version, exactly disable driver signing or driver signature earlier installing the driver."


 Installing Driver amongst AutoInstaller

 First elbow grease the Alternative Driver, which is the AutoInstaller. Just opened upwards the install.exe hence it volition automatically install the driver. To fully depository fiscal establishment gibe if the driver is correctly installed inwards your computer. 

 Follow these steps:
  1. Turn off your telephone (always powered off is a must)
  2. Press as well as concur book upwards or down, or y'all tin uncomplicated press the 2 button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. In your computer, it must honour your telephone as well as it volition install the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to iv if it does non honour your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed y'all are practiced to become inwards flashing your telephone ^_^

 Reference Video using Driver Auto Installer (watch inwards HD)

Installing Manually using VCOM Driver


When installing it manually your telephone must endure turned off, hence connect it to your computer/laptop piece pressing VOLUME UP or VOLUME DOWN. This volition honour as well as await for the driver.


 1. This is the get-go fourth dimension that y'all volition connect your telephone as well as it volition search for the right driver.

2. Check include this location ... ... as well as click on browse. Look for USB VCOM Driver as well as Click on 2K_XP_COM folder if y'all are using Windows XP or Win7 for Windows seven as well as hence press OK when y'all are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM volition look inwards the New Hardware Wizard.
Video Installing VCOM Driver (please scout inwards HD)


"Your Phone must endure turned off when y'all are ready to connect as well as flash your phone"

Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, as well as charge your scatter file. (see instance below)


 Reference Video Using FlashTool version 5.xxx (watch inwards HD)



  3. After y'all charge the file, FILL CUSTPACK, MOBILE_INFO, as well as other file if exclusively available inwards the firmware. Ignore if non available. UNCHECK PRELOADER  only (Never flash preloader), If y'all cannot give-up the ghost along  in flashing without PRELOADER include PRELOADER. Proceed at your ain risk, press Press Download to Flash your Phone.

4. After y'all press Download Follow these steps
  • Turn off your telephone (always powered off is a must)
  • Press as well as HOLD book UP or Down or y'all tin exactly press it simultaneously
  • Insert your USB cable without releasing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.
5. If successfully detected exactly hold off until the progress bar reaches 100%. If your telephone did non automatically plough on afterward flashing, take battery as well as USB cable. And pose dorsum your battery hence plough on your device.

"Hard reset your telephone afterward flashing"

Some workarounds:
If y'all come across PMT_Changed mistake hither is what y'all do:
In Latest version of Flashtool

  1. PMT_CHANGED mistake happen when firmware is non compatible amongst your phone. Sometimes your telephone has a dissimilar board version. You should depository fiscal establishment gibe it too, if your firmware is compatible amongst your phone. 
  2. Try Firmware upgrade
  3. Try dissimilar version of flashtool
  4. Try to laid Format All + Download
  5. Or elbow grease Manual Format get-go hence Download.

If y'all come across Privacy Protection Password:

  1. Open flash_tool.exe
  2. Load the scatter file
  3. Goto Format Tab
  4. Click on Format except bootloader
  5. Press Play/Start Icon
  6. Then take battery
  7. Insert the battery again
  8. Insert the USB cable (you should take heed a beep on your computer, as well as it should give-up the ghost along inwards formatting.)
  9. After done formatting give-up the ghost along inwards Flashing.
  10. Goto Download tab (I assume that y'all loaded the scatter file already)
  11. Uncheck PRELOADER (this is really important)
  12. Press Download
  13. Then take battery
  14. Insert Battery again
  15. Insert the USB cable (you should take heed a beep on your computer, as well as it should give-up the ghost along inwards flashing or downloading the firmware inwards your phone.)
  16. Power ON the telephone afterward flashing.
  17. Restore your IMEI.
For Invalid IMEI (Does non run inwards MT6571 SoC):

  1. Root your telephone via vRoot/iRoot/Kingoroot or your preferred method inwards rooting y'all device. Your telephone must endure rooted first.
  2. Download MTKDroidsTool version 2.4.8 as well as version 2.5.3
  3. Enable your USB debugging inwards Developer Option (you also need this inwards rooting your telephone via PC)
  4. Okay inwards your PC -- Open MTKDroidstool version 2.4.8 (Mtkdroidstool.exe) first. Make certain that y'all connected your telephone already.
  5. Still inwards Mtkdroidstool -- Click ROOT
  6. In your phone -- H5N1 popular upwards dialogue volition appear, just grant or let it.
  7. In your PC -- If root trounce is granted/allowed, Click inwards IMEI/NVRAM tab. If it is grayed out this is the fourth dimension when y'all opened upwards the MTKDroidsTool version 2.5.3.
  8. Enter your master copy IMEI
  9. Click Replace
  10. Reboot your phone


FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your telephone must endure rooted first)


 1. Make certain y'all convey MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you tin search it inwards google)
2.  In MTKDroidstool (I assume y'all launch the tool) -- Click inwards Root. 
3. In your device -- http://d-h.st/miIbAfter y'all press Root, y'all need to authorize it. H5N1 popular upwards message volition appear. Click Allow/Authorize depends on your root application.
4. In MTKDroidsTool -- Click inwards IMEI/NVRAM, hence click inwards RESTORE.
5. Then await for the folder where y'all extracted the NVRAM files.
6. Check if the Baseband is fixed. And if the IMEI is fully restored.
7. If Baseband is nevertheless Unknown as well as IMEI is invalid. Then y'all need to difficult reset get-go your phone.
8. After difficult reset your baseband should endure fixed already. (base on my experience)
9. If your baseband is fixed sometimes the IMEI is nevertheless invalid. So y'all need to restore the IMEI.
10.  To restore IMEI follow Step 1-4, but y'all should non restore. You should make total the IMEI hence click REPLACE. Then reboot your phone.  VOILA! I promise the telephone is fully working :)

 I promise this tutorial help you. Please drib a comment if something is non clear to you.

 Tested by: ME
Tags:

Post a Comment

0 Comments