Mt6580__Alps__Elink8321_Emmc__Elink8321_Emmc__5.1__Alps.L1.Mp6.V2_Elink8321.Emmc_P46

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In only about cases need concur BootKey

Wait for phone...
Phone found! [ nine ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot amongst PL ]
BootLdrSS : NORMAL amongst PRELOADER
Processing DA stage
DA Select done, volition utilization MTK_AllInOne_DA_v5.1624.16.07
Sending together with initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100385750443352001F44BEF62477
Initialize Memory ...
DRAM already initialized past times Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3DPW
[eMMC] : FLASH_CID : 150100385750443352001F44BEF62477
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xBB23AFA94B136882D88360ADAF61A4A2
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content immediately ...

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_elink8321_emmc
ProdModel : elink8321_emmc
Device    : elink8321_emmc
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_ELINK8321.EMMC_P46

[Read Ok] : preloader_elink8321_emmc.bin
[Read Ok] : items.img
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / elink8321_emmc / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1496 MiB
Scatter saved to : C:\Users\Habib\Desktop\READ\MT6580__alps__elink8321_emmc__elink8321_emmc__5.1__ALPS.L1.MP6.V2_ELINK8321.EMMC_P46\

All done!

Done!
Elapsed: 00:08:23
Reconnect Power/Cable!


Operation : Read NVRAM [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In only about cases need concur BootKey

Wait for phone...
Phone found! [ nine ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot amongst PL ]
BootLdrSS : NORMAL amongst PRELOADER
Processing DA stage
DA Select done, volition utilization MTK_AllInOne_DA_v5.1624.16.07
Sending together with initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100385750443352001F44BEF62477
Initialize Memory ...
DRAM already initialized past times Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3DPW
[eMMC] : FLASH_CID : 150100385750443352001F44BEF62477
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xBB23AFA94B136882D88360ADAF61A4A2
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P3_1_wg_n

NVM Read Ok, MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P3_1_wg_n_eMMC.spnv

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!

MT6580__alps__elink8321_emmc__elink8321_emmc__5.1__ALPS.L1.MP6.V2_ELINK8321.EMMC_P46

DOWNLOAD LINK

PASSWORD: 4frp.blogspot.com

How to flash stock firmware rom (flash file)

Step 1: Download together with extract the firmware on your computer.

Step 2: After extracting yous direct keep to download SP Tool if yous already direct keep skip this step.

Step 3: Install the USB Driver (Skip if drivers are already installed).

Step 4: Make certain your yell battery is to a greater extent than than 50%. 
Step 5: Open SP Flash tool together with charge the Scatter file from the firmware Folder.

Step 6: Click on Upgrade / Download Button inward the Sp flash tool to cause down the flashing process.

Step 7: Turn your yell off together with Remove bettery from the yell insert it again. 
Step 8: Connect your smartphone to the reckoner inward off condition.

Step 9: Process indicator volition present yous processing time.
Step 10: Green Ring volition seem at the halt of successful Flash.
Step 11: Now Disconnect the yell together with take battery together with insert inward again. 
Step 12: Be patient mtk cpu base of operations yell direct keep 1 to 10 infinitesimal for getting start inward get-go time. 

Important notes:

Although this firmware is tested notwithstanding direct keep a backup of your mobile yell information earlier flashing or installing the firmware on your smartphone. As this volition help yous to recover the information whenever whatever matter incorrect happens to your smart mobile.