Huawei Mediapad Ti (S8-701Uv100r001c199b006) Official Firmware

HUAWEI MEDIAPAD T1 8.0 FIRMWARE 

(S8-701UV100R001C199B006)

Installation Method 1:

1. Connect your telephone to a PC using USB cable. if telephone is non working properly as well as hence piece of job SD bill of fare reader to re-create these required file to the root directory of sd card.
2. Format your SD bill of fare inwards FAT32 as well as Make a new folder “dload” inwards its root directory
3. Extract the ZIP file as well as re-create all of its contents (“UPDATE.APP”) to the “dload” folder
4. Disconnect your telephone from PC or disconnect your bill of fare reader from the pc.
5. Reboot into recovery agency yesteryear powering off your telephone as well as and hence belongings Volume Down + Volume Up + Power Buttons simultaneously
6. Within a few seconds, the update procedure volition hold out automatically initiated. It volition cause got well-nigh 3-4 minutes.
7. When it gets completed, you lot can use the Backup utility to restore all the data you lot backed upwardly earlier.

Another method to flash this file.

1. Copy the update contents to your SD bill of fare every bit mentioned earlier
2. Navigate to Settings > Updates > System Updates
3. Tap ‘Local Update’, carefully read all the warnings as well as and hence perform a quick backup of your device (in instance you lot haven’t done that already)
4. Next, tap ‘Confirm’ to hold alongside the update installation. It shouldn’t cause got to a greater extent than than v minutes.

Disclaimer:

Please hold inwards take away heed psyche that despite the fact that, this method has been fully tested as well as verified, I shall not hold out held responsible if your device gets screwed upwardly at whatever point. Apply this update at you lot ain risk.

DOWNLOAD