O+ 8.36Z Firmware / Stock Rom To Unbrick Your Phone

This firmware is for O+ 8.36z, yous tin flash this firmware / stock rom via Flashtool. It has already the CWM or Clock Work Mod Recovery, thence if yous cant to install custom yous tin operate it.

"Download these files"
Firmware Here -->O+ 8.36z
VCOM Driver -->VCOM Manual
Alternative Driver --> AutoInstaller

SPFlashTool --> LatestVersion 

"Use WinRar or 7zip to extract the firmware"
"Extract the files to your desired folder"
"If yous reckon mistake inwards flashtool, operate unlike version of it."

"I advise to operate 32bit Windows OS for compatibility of the driver"

Installing Driver alongside AutoInstaller

First endeavour the Alternative Driver, which is the AutoInstaller. Just opened upwards the install.exe thence it volition automatically install the driver. To fully banking company gibe if the driver is correctly installed inwards your computer. 

Follow these steps:

1. Turn off your telephone (always powered off is a must)
2. Press in addition to concord book upwards or down, or yous tin uncomplicated press the 2 button
3. Insert your USB cable without releasing the VOLUME button(s).
4. In your computer, it must discovery your telephone in addition to it volition install the MTK Preloader or Mediatek USB VCOM driver.
5. Repeat 1 to four if it does non discovery your phone.
6. If MTK Preloader/Mediatek USB VCOM Driver is installed yous are skilful to become inwards flashing your telephone ^_^

Reference Video using Driver Auto Installer (watch inwards HD)

Installing Manually using VCOM Driver

When installing it manually your telephone must survive turned off, thence connect it to your computer/laptop piece pressing VOLUME UP or VOLUME DOWN. This volition discovery in addition to await for the driver.

 1. This is the showtime fourth dimension that yous volition connect your telephone in addition to it volition search for the right driver.

2. Check include this place ... ... in addition to click on browse. Look for USB VCOM Driver in addition to Click on 2K_XP_COM folder if yous are using Windows XP or Win7 for Windows vii in addition to thence press OK when yous are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM volition seem inwards the New Hardware Wizard.

Video Installing VCOM Driver (please sentinel inwards HD)

"Your Phone must survive turned off when yous are cook to connect in addition to flash your phone"

Flashing

1. Launch FlashTool (flash_tool.exe)

2. In Flashtool, Click on Scatter-Loading, in addition to charge your scatter file. (see representative below)

Reference Video Using FlashTool version 5.xxx (watch inwards HD)

 3. After yous charge the file, press Press Download to Flash your Phone.

4. After yous press Download Follow these steps

• Turn off your telephone (always powered off is a must)
• Press in addition to HOLD book UP or Down or yous tin exactly press it simultaneously
• Insert your USB cable without releasing the VOLUME button(s).
• Keep on repeating until Flashtool detected your phone.

5. If successfully detected exactly hold off until the progress bar reaches 100%. If your telephone did non automatically plough on subsequently flashing, take battery in addition to USB cable. And position dorsum your battery thence plough on your device.

"Hard reset your telephone subsequently flashing"

Some workarounds:

If yous reckon PMT_Changed error hither is what yous do:

In Latest version of Flashtool

1. Load the scatter file
2. Choose Format all + Download (Underneath Scatter-loading file)
3. Then Click Download in addition to hold off until it is done flashing

For Invalid IMEI:Your Phone/Tablet must survive rooted first
Restore yong IMEI inwards MTKDroidTools version 2.5.3. You volition convey this mistake when yous format your telephone inwards Flashtool every bit I had experienced. To restore download MTKDroidTools version 2.5.3 After yous extract the file. Open the greenish robot, yous must enable the usb debugging inwards your phone. It is unremarkably located inwards Settings>Devoloper Mode thence await for usb debugging. After enabling it. Connect your telephone inwards your figurer thence inwards MTKDroidTool click on ROOT. Wait for it to finish, thence Click inwards IMEI/NVRAM, input fifteen release inwards each box. Then click REPLACE. Then click Reboot or yous tin manually plough off your phone. Then plough your telephone on again. You tin reckon that yous convey fully restored your IMEI.

I promise this tutorial assistance you. Please driblet a comment if something is non clear to you.